Table 2 – HP XP Data Shredder Software User Manual
Page 18
Table 2 Storage arrays that can be connected as external arrays
Storage array
Notes
HP StorageWorks XP12000 Disk Array
•
In External Storage XP panes, the array appears
as “12000”.
•
Alternate paths are in Multi mode (meaning that
dynamic load balancing across multiple active
paths is enabled).
HP StorageWorks XP10000 Disk Array
•
In External Storage XP panes, the array appears
as “10000”.
•
Alternate paths are in Multi mode.
HP StorageWorks XP1024/XP128 Disk Array
•
In External Storage XP panes, the arrays appear
as “1024” and “128”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP512/XP48 Disk Array
•
In External Storage XP panes, the arrays appear
as “512” and “48”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP256 Disk Array
•
In External Storage XP panes, the array appears
as “256”.
•
Alternate paths are in Multi mode.
HP StorageWorks 200 Storage Virtualization System
•
In External Storage XP panes, the array appears
as “SVS200”.
•
Alternate paths are in Multi mode.
HP StorageWorks 3000/5000 Enterprise Virtual
Array (Active/Standby and Active/Active controllers)
or HP StorageWorks 4000/6000/8000 Enterprise
Virtual Array (Active/Active controllers)
•
In this user guide, the arrays appear as “EVA
array”.
•
In External Storage XP panes, the arrays appear
as “EVA”.
•
Alternate paths are in Single mode (meaning that
dynamic load balancing across multiple active
paths is not enabled).
HP StorageWorks MSA1000/1500 (Active/Standby)
•
In this user guide, the arrays appear as “MSA
array”.
•
In External Storage XP panes, the arrays appear
as “MSA”.
•
Alternate paths are in Single mode.
TagmaStore™ Universal Storage Platform subsystem
•
In this user guide, the array appears as
“TagmaStore™ USP subsystem”.
•
In External Storage XP panes, the array appears
as “USP”.
•
Alternate paths are in Multi mode.
TagmaStore™ Network Storage Controller subsystem
•
In this user guide, the array appears as
“TagmaStore™ NSC subsystem”.
•
In External Storage XP panes, the array appears
as “NSC”.
•
Alternate paths are in Multi mode.
TagmaStore™ Adaptable Modular Storage subsystem
•
In this user guide, the array appears as
“TagmaStore™ AMS subsystem”.
•
In External Storage XP panes, the array appears
as “AMS”.
•
Alternate paths are in Single mode.
18
Preparing for External Storage XP operations