HP XP Racks User Manual
Page 84
Description
SSB2 code
The pair task was rejected because the emulation type of the specified P-VOL is different from the
emulation type of the S-VOL.
2336
For more information about pair volumes and supported emulation types, see
supported emulation types” (page 12)
The pair operation was rejected because the volume you specified as the P-VOL had already been
an S-VOL.
2337
The pairresync RAID Manager command was rejected because the volume you specified as the
P-VOL is not a BC Z P-VOL.
233A
The pair task was rejected because the volume you specified as the S-VOL is a root volume.
233B
The pair task was rejected because the volume you specified as the S-VOL is a node volume, and the
volume you specified as the P-VOL is not the P-VOL for the specified S-VOL.
233C
The pairsplit RAID Manager command was rejected because the specified P-VOL and S-VOLs
were a L2 pair, and the L1 pair is not split (“Split/SUSPOP” status).
233D
The pair task was rejected because the volume you specified as the P-VOL is being used as the Cnt
Ac-S Z P-VOL.
233E
The pair task was rejected because the volume you specified as the S-VOL is the Cnt Ac-S Z P-VOL,
and the pair is not split (“Split/SUSPOP” status) or suspended (“Suspend/SUSPER” status).
233F
The pair task was rejected because the volume you specified as the S-VOL is the destination of the
Auto LUN.
2342
The pair was not created because the volume you specified as the S-VOL had already been an S-VOL.
2343
The pair task was rejected because the volume you specified as the S-VOL for BC Z pair tasks is not
an S-VOL.
2344
The volume you specified as an BC Z S-VOL is a Cnt Ac-S Z P-VOL. The pair task was rejected because
the Cnt Ac-S Z pair is not in the required status.
2346
For more information about the required status for each pair task, see
“Pair status and supported pair
.
The volume you specified as an BC Z S-VOL was a Cnt Ac-S Z S-VOL. The pair task was rejected
because the Cnt Ac-S Z pair is not in the required status.
2347
For more information about the required status for each pair task, see
“Pair status and supported pair
.
The pair creation for the cascade configuration was rejected because the volume you specified as
the S-VOL is an intermediate volume.
234A
For more information about pair volumes and supported emulation types, see
supported emulation types” (page 12)
The pair task was rejected because the volume you specified as the S-VOL is the volume of the Auto
LUN.
234B
The pair task was rejected because the specified P-VOL and the S-VOL for BC Z pair tasks is not a
pair.
2350
The pair task was rejected because the volume you specified as the P-VOL and the volume you specified
as the S-VOL are the same.
2351
The pair was not restored because the specified P-VOL and S-VOLs is online to the host.
2352
The pair was not deleted because the specified P-VOL and S-VOLs are in the process of being Quick
Split.
2353
The pairresync RAID Manager command was rejected because the P-VOL and S-VOLs is in the
process of being Steady Split.
2354
The pair creation was rejected because the volume you specified as the S-VOL is the P-VOL of the pair
you are splitting or the P-VOL of the pair you are reverse resynchronizing.
2357
84
Troubleshooting Business Copy Z