HP XP Racks - Manual (Page 98)

Description Value Parameters
Re-establish a split or suspended pair. RESYNC MODE
Copy speed is medium, regardless what is
specified for the PACE parameter. 1-255 PACE
Not used by BC Z. Not applicable CRIT
To prevent the command from ending
abnormally (reporting CC = 12), do not specify
the parameter if MODE(RESYNC) is set. YES MSGREQ
NO
NA P-VOL or S-VOL CU number. LSS
You can Normal Copy when the S-VOL is
online or offline. YES ONLINSEC*
You can reverse resynchronize the pair when
the P-VOL and S-VOL are online or offline.
You can Normal Copy when the S-VOL is
online. NO
You can reverse resynchronize the pair when
the P-VOL and S-VOL are online. The ICKDSF
job ends abnormally (reporting CC = 12).
Note: Although an error does not occur if you
specify YES for this parameter, the copy
operation is performed. The storage system
does not check to see if the volume is online.
* Not specifying and specifying NO for this parameter has the same effect.
The following image shows an example or running the PPRCOPY ESTPAIR PPRCOPY command
with MODE(RESYNC):
Deleting pairs with CDELPAIR and DELPAIR
Prerequisite: The pairs are split (“Split/SUSPOP” status), which ensures S-VOL data integrity.
•
Run the one of the following commands to the P-VOL:
•
(For PPRC) CDELPAIR
•
(For PPRCOPY) PPRCOPY DELPAIR
98 Business Copy Z pair user tasks using IBM PPRC