HP XP P9500 Storage User Manual
Page 155
2.
Ensure that the Journal Operation window is open.
3.
In the tree, select a master journal or a restore journal from below Registered > LDKC00.
4.
From the mirrors, select and right-click the mirror that you want to release the assigned remote
command device.
5.
Select Mirror > Release R-Cmd Dev on the pop up menu.
6.
Review your settings in the Preview list in the Journal Operation window.
•
To modify a setting, right click and select Modify.
•
To cancel a setting, right click and select Delete.
7.
Click Apply to release the remote command device from the mirror. If an error occurs, the
error code appears in the right-most column of the Preview list. To view detailed information
about the error, right click the error code and select Error Detail.
See the list in the Journal Operation window whether the remote command device is released
from the mirror or not. If the remote command device is not assigned, the column of the remote
command device is blank.
Delta resync configuration
155