HP XP P9500 Storage - Manual (Page 188)

Description Item
• VOL: The volume manipulated during the operation. This volume is located in the local system.
This number indicates LDKC:CU:LDEV (the LDKC number, the CU number, and the LDEV
number). A volume ending in # (e.g., 00:00:3C #) indicates the LDEV is an external volume.
For details, see HP P9000 External Storage for Open and Mainframe Systems User Guide.
A volume ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning Z virtual
volume.
• Paired VOL: The volume paired with the manipulated volume. This volume is located in the
remote system. This number indicates LDKC:CU:LDEV (the LDKC number, the CU number,
and the LDEV number).
•
EXCTG: The EXCTG number. This column is blank if the volume does not belong to any
EXCTG. If the Business Continuity Manager YKMAKE command was used to create a pair,
this column may not display the EXCTG number.
•
Copy Time: The time taken for the operation (from the start of the operation to the end).
Displayed only for Paircreate Complete and Pairresync Complete operations.
Related Topics
•
Information about field behavior is shown in “History window notes” (page 189) .
•
Descriptions of the pair operations seen in the window are provided in “Operations in History
window ” (page 188) .
Operations in History window
Copy operations have a beginning and end. These parts of the overall operations are detailed in
the History window, and described here.
Description Operation Displayed
A pair was defined. Pair definition
Creation of the pair was started. Add Pair Start
Creation of the pair was finished. Add Pair Complete
Restoring of the pair was started. Resume Pair Start
Restoring of the pair was finished. Resume Pair Complete
Splitting (Suspending) of the pair was started. Suspend Pair Start
Splitting (Suspending) of the pair was finished. Suspend Pair Complete
The pair was split (suspended) because of a failure. Suspend Pair(Failure)
Release of the pair was started. Delete Pair Start
Release of the pair was finished. Delete Pair Complete
The status of the pair was changed from Simplex to Pending
because of an operation from the primary system. Status Change by MCU(Simplex to Pending)
The status of the pair was changed from Simplex to Duplex
because of an operation from the primary system. Status Change by MCU(Simplex to Duplex)
The status of the pair was changed from Pending to Duplex
because of an operation from the primary system. Status Change by MCU(Pending to Duplex)
The status of the pair was changed from Pending to Suspend
because of an operation from the primary system. Status Change by MCU(Pending to Suspend)
The status of the pair was changed from Duplex to Suspend
because of an operation from the primary system. Status Change by MCU(Duplex to Suspend)
The status of the pair was changed from Duplex to Simplex
because of an operation from the primary system. Status Change by MCU(Duplex to Simplex)
188 GUI reference