HP XP P9500 Storage - Manual (Page 65)

5. Click Set. Review if needed in the Preview list.
•
To modify the setting, right click and select Modify.
•
To cancel, right click and select Cancel.
6. Click Apply to save the configuration.
Registering journal volumes in a journal
You set up journal volumes by registering them in a journal. The procedure in this section allows
you to register journal volumes for use in 3 Cnt Ac-J Z DC configurations. You must either enable
all journal volumes being registered in the session for use in a 3 Cnt Ac-J Z DC configuration, or
specify that all journals registered in the session are not for use in these configurations (disable).
Prerequisite information
•
Review the following:
“System requirements” (page 16) ◦
◦ “Planning journals ” (page 23)
◦ “Planning journal volumes ” (page 25)
◦ “Data and journal volume specifications” (page 26)
•
The journal’s mirror status must be Initial, Active, Stopped, Hold, Holding, or Hold(Failure.
•
The journal cannot be in use.
•
Pair operations involving the journal cannot be in progress.
•
Cache Residency settings cannot be defined for the volumes.
Procedure 8 To register journal volumes
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal Z >
Journal Operation.
2. In the Journal Operation window, click to change the mode from View to Modify.
3. To register journal volumes in an existing journal, select the journal from the Registered >
LDKC00 tree.
To register journal volumes in a new journal, select the journal from the Free > LDKC00 tree.
The selected journal displays in the table pane.
4. Right-click the selected journal then select Edit JNL VOLs from the menu.
Registering journal volumes in a journal 65