HP XP P9500 Storage - Manual (Page 193)

Description Item
Applies settings in the Preview list to the system. Apply
Cancels the settings in the Preview list. Cancel
Information is updated when you do one of the following:
•
Click Apply.
•
Select another tab and then return to the EXCTG Operation tab.
•
Click File/Refresh.
View the EXCTG List
To display the list of EXCTGs
1.
Navigate to the EXCTG Operation window.
2. List EXCTGs in the right-side pane as follows:
•
To view all EXCTGs, select EXCTG.
•
To view EXCTGs with registered journals, select Registered. To display EXCTGs belonging
to an LDKC, select the LDKC from below Registered.
•
To view EXCTGs with no journals select Free. To view EXCTGs belonging to an LDKC,
select the LDKC from below Free.
The EXCTGs display in the right-side list as shown in the following table.
Fields in the EXCTG list are described in the following table.
Description Item
An EXCTG number and an LDKC number that is enclosed by parentheses. This number is a
two-digit hexadecimal number. EXCTG
The attribute of an EXCTG. Attribute
An EXCTG in primary site (primary EXCTG).
An EXCTG in secondary site (secondary EXCTG).
In this column, the word changing appears when all journals in an EXCTG are being registered.
The consistency time of an EXCTG. For example, if the consistency time is 10:00 a.m., S-VOLs
in the EXCTG are synchronized with the P-VOLs that were available as of 10:00 a.m. C/T
The consistency time appears in the following format:
month/date/year/hour/minute/second
For the number of seconds, the number before and after the decimal point appears.
In this column, the phrase Time is not consistent appears if secondary volumes in active journals
in the EXCTG do not have the same time stamp. For example, when a new journal is added to
the EXCTG, Time is not consistent appears if the time stamp of an S-VOL in this journal is newer
than the time stamp of S-VOLs in the existing journals.
Notes:
• To maintain data update sequence, Cnt Ac-J Z performs arbitration processing on journals
in Active status only. Cnt Ac-J Z does not perform arbitration processing on journals in Stopped
status.
•
There is no time stamp appears in this column for an extended journal containing journals,
if an initial copy operation is performed when hosts do not issue any I/O request.
EXCTG Operation window 193