HP XP P9500 Storage - Manual (Page 69)

The following additional information may be useful to you before beginning the procedure:
•
You will select the volumes you will pair by the volume’s CU and LDEV numbers. Make sure
to have this information available.
•
You will assign master and restore journals to the P-VOL and S-VOL during the operation.
•
You will assign a mirror ID to the pair. This identifies the pair within the journal. A mirror refers
to the pair within the journal.
Procedure 9 To create an initial copy or copies
1. In the Remote Web Console main window, select Actions > Remote Copy > Continuous Access
Journal Z > Pair Operation.
2. Click to change the mode from View to Modify.
3. In the tree, select a CU group number or CU number.
4. From the list of volumes in the right pane, right-click a volume you want to pair select Add
Pair from the menu.
•
Volumes with the pair icon are already used as P-VOLs.
•
Volumes with the pair icon are already used as S-VOLs.
•
If you create more than one pair at a time, the S-VOLs must be in the same secondary
system.
Creating the initial copy 69