HP XP P9500 Storage - Manual (Page 181)

Description Item
Lists the remote systems of each LDKC in the local system. The following information appears to the
right of the remote system’s icon : Tree
• Controller ID of the remote system (The model name of the remote system).
•
Serial number of the remote system.
• Path group ID.
Note: The LDKC#01 cannot be used in this version of the Cnt Ac-J software.
The icon indicates the status of logical paths between the local system and the remote system:
All the logical paths are in normal status.
A failure occurred at some of the logical paths.
Shows information about the selected remote system: Operation
•
Controller ID: The controller ID and the model name of the system of a remote system. Note the
following controller IDs: P9500 = 6. XP24000/XP20000 Disk Array = 5, XP12000 Disk
Array/XP10000 Disk Array = 4.
The icon indicates the status of logical paths between the local system and the remote system:
All the logical paths are in normal status.
A failure occurred at some of the logical paths.
•
S/N (LDKC): The 5-digit serial number and the LDKC number of the remote system. When the
remote system is XP24000/XP20000 Disk Array, “00” appears as the LDKC number.
• Path Gr. ID: The path group ID.
•
M-R Path: The channel type of the logical paths between the local system and the remote system.
This column always shows Fiber.
• Status: Indicates whether logical paths fail.
- Normal: No failure occurs to the logical paths
- Failed: All the logical paths fail.
- Warning: Some of the logical paths fail.
• Num of Path: The number of logical paths.
Logical Path Information
The list area on the DKC Operation window shows information about logical paths between ports
on the local and remote systems when you select DKC in the Display box and the remote system
in the tree.
Description Item
The path group ID. The icon indicates the status of the path: Path Gr. ID
The logical path is in normal status
DKC Operation window 181