HP XP P9500 Storage - Manual (Page 189)

Description Operation Displayed
The status of the pair was changed from Pending to Simplex
because of an operation from the primary system. Status Change by MCU(Pending to Simplex)
The status of the pair was changed from Suspend to Simplex
because of an operation from the primary system. Status Change by MCU(Suspend to Simplex)
The status of the pair was changed from Suspend to Pending
because of an operation from the primary system. Status Change by MCU(Suspend to Pending)
The status of the pair was changed because an operation for
splitting a pair started at the secondary system. Status Change by RCU(Suspend Pair Start)
The status of the pair was changed because an operation for
splitting a pair finished at the secondary system. Status Change by RCU(Suspend Pair Complete)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Suspend
to Simplex. Status Change by RCU(Suspend to Simplex; Delete
Pair Start)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Pending
to Simplex. Status Change by RCU(Pending to Simplex; Delete
Pair Start)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Duplex
to Simplex. Status Change by RCU(Duplex to Simplex; Delete
Pair Start)
The status of the pair was changed because an operation for
releasing a pair finished at the secondary system. Status Change by RCU(Delete Pair Complete)
A pair became ready for delta resync. Ready for Delta resync
The failure occurred with the pair which was ready for delta
resync. Ready for Delta resync(Failure)
The status of the P-VOL was changed to Hold because of a delta
resync operation. Status Change for Delta resync
The status of the pair was changed from Simplex to Hold because
of an operation from the primary system. Status Change by MCU(Simplex to Hold)
The status of the pair was changed from Hold to Duplex because
of an operation from the primary system. Status Change by MCU(Hold to Duplex)
The status of the pair was changed from Hold to Pending because
of an operation from the primary system. Status Change by MCU(Hold to Pending)
The status of the pair was changed from Hold to Simplex because
of an operation from the primary system. Status Change by MCU(Hold to Simplex)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Hold to
Simplex. Status Change by RCU(Hold to Simplex; Delete Pair
Start)
The status of the S-VOL was changed to Hold because of a delta
resync operation. Status Change to Hold
The status of the pair was changed from Suspend to Pending
because of an operation from the primary system. Status Change by MCU(Suspend to Pending)
The system could not identify the type of the operation. Unknown
History window notes
•
The operation rows may not appear in chronological descending order. To sort the information
in descending (or ascending) order, click a heading.
•
The history file always contains the most recent operations up to a maximum of 524,288
operations. Information older than seven days is not shown.
History window 189