HP XP P9500 Storage - Manual (Page 156)

D Configurations with Business Copy Z
Continuous Access Journal Z and Business Copy Z can share the same data volumes to provide
multiple copies of data, at both the primary and secondary sites.
This appendix provides configurations and information for using Business Copy Z with Continuous
Access Journal Z. For details about Business Copy Z, see the HP P9000 Business Copy for
Mainframe Systems User Guide.
Overview
Continuous Access Journal Z’s main function is to maintain a copy of the production volume in a
remote location. Backing up the local and/or remote Continuous Access Journal Z (Cnt Ac-J Z)
volumes with Business Copy Z (BC Z), or backing up the BC Z volumes with Cnt Ac-J Z, provides
additional advantages.
•
When sharing the primary volume with BC Z
On-site data backup is provided in case of a Cnt Ac-J Z failure. ◦
◦ Multiple copies of production data are provided on the local site for secondary purposes,
such as data analysis, testing and so on.
•
Sharing the BC Z secondary volume with the Cnt Ac-J Z primary volume on the local site
provides a remote copy.
•
When BC Z is cascaded on the remote side, data in the BC Z secondary volume can be used
for testing the Cnt Ac-J Z system and for recovery purposes.
◦ The BC Z secondary volume is available for continuous replication during a test.
◦ If a Cnt Ac-J Z problem is encountered during an actual recovery procedure, the BC Z
secondary volume provides a golden copy of the Cnt Ac-J Z secondary volume, which
can be used to restore the Cnt Ac-J Z secondary volume.
NOTE: To split the BC Z pairs in a consistency group whose volumes are also used in Cnt Ac-J
Z pairs, the Cnt Ac-J Z pairs must be in Duplex or Suspend status.
Cnt Ac-J Z data volumes are shared with BC Z volumes in specific configurations. The following
topics discuss these supported configurations.
Configurations with Business Copy Z primary volumes
NOTE: Business Copy Z source and target volumes are now referred to in Remote Web Console
as “primary” and “secondary” volumes. However, if using the previous version of the GUI, “source
volume (S-VOL)” and “target volume (T-VOL)” are still used. Terms in this document correspond to
the current GUI terminology.
A BC Z primary volume can be shared with a Cnt Ac-J Z primary or secondary volume.
•
A BC Z primary volume shared with the Cnt Ac-J Z primary volume is illustrated below. This
configuration allows you to use BC Z for on-site data backup in case of a Cnt Ac-J Z failure,
and to use Cnt Ac-J Z to provide remote backup of the BC Z primary volume in case of a BC
Z failure.
156 Configurations with Business Copy Z