HP XP7 Storage - Manual (Page 97)

2
.
Use a text editor to edit the sample file that was copied in step 1, in order
to create an installation-information settings file for your particular
configuration.
Items that need to be defined in the installation-information settings file
are described in Contents of an Installation-Information Settings File on
page 7-18 below.
Notes on an Unattended Installation
• Do not forcibly stop the execution of the installhdlm utility during an
unattended installation of HDLM. Even if you forcibly stop the execution of
the installhdlm utility, the HDLM installation will not be stopped. If you
have specified y for the restart key in the installation-information
settings file, the computer will restart after the installation finishes
successfully. Make sure that you check the results of the installation in
installhdlm.log, if you had to forcibly stop the execution of the
installhdlm utility.
• The disk capacity necessary for the execution of the installhdlm utility is
as follows:
A folder specified in the workdir key (if the workdir key has not been
specified, a folder specified in the TMP or TEMP environment variable)
must have at least 20 KB of free disk capacity.
• Information for the HDLM operation can also be specified by using the
HDLM command's set operation. To specify the information by using this
way, see Setting Up HDLM on page 3-71 and make sure that an
untended installation is completed.
For details about what can be defined in a installation-information settings
file, see Contents of an Installation-Information Settings File on page
7-18 .
For details about the set operation of the HDLM command, see set (Sets
Up the Operating Environment) on page 6-16 .
Performing a New Installation of HDLM on Windows Server 2003
In a Non-Cluster Environment
Before installing HDLM, have a license key ready.
If you want to perform an unattended installation, also be sure to prepare an
installation-information settings file.
To install HDLM on a host that does not currently have HDLM installed
on it:
1
.
Log on to Windows as a member of the Administrators group.
2
.
Save the license key file directly under the Windows installation-
destination drive.
installation-drive:\hdlm_license
Creating an HDLM Environment
3-29
Hitachi Dynamic Link Manager (for Windows®) User Guide