HP LaserJet P4015 Printer series - Manual (Page 103)

4. Press the down arrow to highlight SLEEP MODE, and then press OK .
5. Press the up arrow or the down arrow to select ON or OFF, and then press OK .
6. Press Menu .
Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
Set the wake time
1. Press Menu .
2. Press the down arrow to highlight CONFIGURE DEVICE, and then press OK .
3. Press the down arrow to highlight SYSTEM SETUP, and then press OK .
4. Press the down arrow to highlight WAKE TIME, and then press OK .
5. Press the up arrow or the down arrow to select the day of the week, and then press OK .
6. Press the down arrow to select CUSTOM, and then press OK .
7. Use the numeric keypad, or press the up arrow or the down arrow to select the hour, and then
press
OK .
8. Use the numeric keypad, or press the up arrow or the down arrow to select the minutes, and
then press
OK .
9. Press the up arrow or the down arrow to select AM or PM, and then press OK .
10. Press OK to select APPLY TO ALL DAYS.
11. Press the up arrow or the down arrow to select YES or NO, and then press OK .
12. If you select NO, press the up arrow or the down arrow to set the WAKE TIME for the other
days of the week, and then press
OK to accept each selection.
13. Press Menu .
ENWW Economy settings 91