HP LaserJet P4015 Printer series User Manual
Page 166
Control panel message
Description
Recommended action
To use another tray press OK
alternates with
LOAD ENVELOPE FEEDER [TYPE] [SIZE]
For help press
If paper is already in the envelope feeder,
press
OK
to print.
To use another tray, remove paper from the
envelope feeder, and then press
OK
to print.
LOAD TRAY 1 [TYPE] [SIZE]
To continue press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty.
Load Tray 1 with the requested paper.
If the paper is already in the Tray 1, press the
help button , and then press
OK
to print.
To use another tray, remove paper from
Tray 1, and then press
OK
to continue.
LOAD TRAY 1 [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty and other trays are available. Press
OK
to use another tray.
To use Tray 1, load it with the requested
paper.
If the paper is already in the Tray 1, press the
help button , and then press
OK
to print.
To use another tray, remove paper from Tray
1, and then press
OK
to use another tray.
LOAD TRAY <XX> [TYPE] [SIZE]
For help press
The indicated tray is configured for a specific
type and size of paper needed by a print job,
but the tray is empty. All other trays are also
empty.
Load the requested paper in the tray that is
indicated.
LOAD TRAY <XX> [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY <XX> [TYPE] [SIZE]
For help press
A job is sent that requires a specific type and
size that is not available in the tray that is
indicated.
Press
OK
to use a type and size that are
available in another tray.
LOWER THE <BINNAME>
For help press
The optional bin is in the up position.
Lower the bin.
MANUALLY FEED [TYPE] [SIZE]
The product is waiting for paper to be loaded
in Tray 1 for manual feed.
If paper is already in the Tray 1, press the help
button , and then press
OK
to print.
To use another tray, remove paper from Tray
1, and then press
OK
.
MANUALLY FEED [TYPE] [SIZE]
To continue press OK
alternates with
MANUALLY FEED [TYPE] [SIZE]
For help press
The product is waiting for paper to be loaded
in Tray 1 for manual feed.
Load the requested paper into Tray 1 and
press
OK
.
MANUALLY FEED [TYPE] [SIZE]
The product is waiting for paper to be loaded
in Tray 1 for manual feed.
Press
OK
to use a type and size that are
available in another tray.
Table 10-1
Control-panel messages (continued)
154 Chapter 10 Solve problems
ENWW