HP LaserJet P4015 Printer series User Manual
Page 162
Control panel message
Description
Recommended action
If the error no longer exists, follow these
steps.
1.
Install the DIMM and EIO device one at
a time, making sure to turn the product
off and then on as you install each
device.
2.
Replace the DIMM or EIO device if you
determine that it causes the error.
3.
Reconnect all cables that connect the
product to the network or computer.
8X.YYYY EIO ERROR
The EIO accessory card in slot [X] has
encountered a critical error.
1.
Turn the product off and then on.
2.
Turn the product off, reseat the EIO
accessory in slot [X], and then turn the
product on.
3.
Turn the product off, remove the EIO
accessory from slot [X], install it in a
different EIO slot, and then turn the
product on.
4.
Replace the EIO accessory in slot [X].
8X.YYYY EMBEDDED JETDIRECT ERROR The embedded HP Jetdirect print server has
encountered a critical error.
1.
Turn the product off and then on.
2.
If the message persists, contact an HP-
authorized service or support provider.
Access denied
MENUS LOCKED
The product control-panel function you are
trying to use has been locked to prevent
unauthorized access.
See your network administrator.
ACTION NOT CURRENTLY AVAILABLE
FOR TRAY X
Tray size cannot be ANY SIZE/ANY
CUSTOM
Duplexing is not available when the tray size
is set to ANY SIZE or ANY CUSTOM.
Change tray settings.
1.
Press
Menu
.
2.
Press the down arrow to highlight
PAPER HANDLING, and then press
OK
.
3.
Press the down arrow to highlight the
specified tray, and then press
OK
.
4.
Change the selected tray's size and type
settings.
BAD DUPLEXER CONNECTION
For help press
The optional duplexer is not properly
connected to the product.
1.
Make sure that you are using the right-
angle power cord that came with the
product.
2.
Try removing and reinstalling the
optional duplexer. Then turn the product
off and then on.
BAD ENVELOPE FEEDER CONNECTION
The optional envelope feeder is not
connected properly to the product.
Try removing and reinstalling the optional
envelope feeder. Then, turn the product off
and then on.
Table 10-1
Control-panel messages (continued)
150 Chapter 10 Solve problems
ENWW