HP LaserJet P4015 Printer series - Manual (Page 44)

Menu item Sub-menu item Sub-menu item Values and Description
PROXY SERVER Specifies the proxy server to be used by embedded
applications in the product. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you might need to contact your
Internet Service Provider (ISP) for the proxy server
address.
PROXY PORT Type the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can be
a value from 0 to 65535.
IDLE TIMEOUT IDLE TIMEOUT: The time period, in seconds, after
which an idle TCP print data connection is closed
(default is 270 seconds, 0 disables the timeout).
IPX/SPX ENABLE OFF: Disable the IPX/SPX protocol.
ON*: Enable the IPX/SPX protocol.
FRAME TYPE Selects the frame-type setting for your network.
AUTO: Automatically sets and limits the frame type to
the first one detected.
EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
type selections for Ethernet networks
APPLETALK ENABLE OFF: Disable the AppleTalk protocol.
ON*: Enable the AppleTalk protocol.
DLC//LLC ENABLE OFF: Disable the DLC/LLC protocol.
ON*: Enable the DLC/LLC protocol.
Table 2-1 Embedded Jetdirect and EIO <X> Jetdirect menus (continued)
32 Chapter 2 Control panel ENWW