HP LaserJet P4015 Printer series - Manual (Page 36)

Item Values Explanation
NOTE: It is best to turn EconoMode on or off in the program
or printer driver. (Program and printer-driver settings override
control-panel settings.)
The default setting is OFF.
TONER DENSITY 1 to 5 Lighten or darken the print on the page by setting the toner
density. Select a setting ranging from 1 (light) to 5 (dark). The
default setting of 3 usually produces the best results.
AUTO CLEANING OFF
ON
Use this feature to automatically clean the paper path after the
product has printed a specific number of pages. Use the
CLEANING INTERVAL item to set the number of pages.
The default is OFF.
CLEANING INTERVAL 1000
2000
5000
10000
20000
This item appears only if AUTO CLEANING is on.
Select the number of pages at which the product should
perform the cleaning process.
AUTO CLEANING SIZE LETTER
A4
This item appears only if AUTO CLEANING is on.
Use to set the size for the automatically generated cleaning
page.
CREATE CLEANING PAGE There is no value to select. Press OK to print a cleaning page (for cleaning toner from the
fuser). Follow the instructions on the cleaning page. For more
information, see
Clean the paper path on page 133 .
PROCESS CLEANING
PAGE There is no value to select. This item is available only after a cleaning page has been
created. Follow the instructions that are printed on the cleaning
page. The cleaning process might take up to 2.5 minutes.
24 Chapter 2 Control panel ENWW