HP StorageWorks XP Remote Web Console Software - Manual (Page 142)

4-8 Chapter 4 Using the Universal Replicator for z/OS GUI
Hitachi Universal Replicator for IBM /OS User’s Guide
The Pair Operation window displays the following:
• Tree: Lists LDKCs and lists CU images under the LDKC in the local storage
system ( ).
If you select a CU image, the list displays volumes for the CU image. You
can select only one CU image at one time and cannot select two or more
simultaneously.
• Upper-right buttons: The following buttons appear at the upper-right
corner of the window:
– Display Filter: Displays the Display Filter window (see Figure 8-1).
This window allows you to narrow information in the list, so that the list
displays only the volumes that satisfy certain conditions. For detailed
information, see section Filtering Information in the List in the Pair
Operation Window.
– Export: Saves information about volume pairs in a text file. For
detailed information, see section Saving Pair Status Information into a
Text File.
– Previous: The list can display up to 1,024 volume pairs
simultaneously. If the number of volume pairs exceeds 1,024, you can
use the Previous and Next buttons to display the remaining volume
pairs in the list. The Previous button displays the previous 1,024 volume
pairs in the list.
– Next: The list can display up to 1,024 volume pairs simultaneously. If
the number of volume pairs exceeds 1,024, you can use the Previous
and Next buttons to display the remaining volume pairs in the list. The
Next button displays the next 1,024 volume pairs in the list.
• List: Displays volumes in the local storage system. One row represents
one volume.
By default, information in the list is arranged in order of port numbers. For
volumes with more than one path, each path is displayed in a separate
row.
The maximum number of rows in the list is 1,024. If the number of
volumes exceeds the number of rows, you can use the Previous and Next
buttons to view information about volumes that do not appear in the list
currently.