HP StorageWorks XP Remote Web Console Software - Manual (Page 213)

Chapter 6 Configuring Journal Groups 6-15
Hitachi Universal Replicator for IBM /OS User’s Guide
Halting An operation for splitting or deleting the mirror is in progress. The primary data
volume and the secondary data volume are not synchronized.
When you split a mirror, the status will change in the following order: Halting, Halt, Stopping,
and finally Stop.
When you delete a mirror, the status will change in the following order: Halting, Halt,
Stopping, Stop, and finally Initial.
Halt An operation for splitting or deleting the mirror is in progress. The primary data
volume and the secondary data volume are not synchronized.
Stopping An operation for splitting or deleting the mirror is in progress. The primary data
volume and the secondary data volume are not synchronized.
Stop Either of the following:
• An operation for splitting the mirror is finished.
• The operation for deleting the mirror is in progress.
The primary data volume and the secondary data volume are not synchronized.
Hold A URz pair for delta resync operation is created.
Hold(Failure) An error occurred with the URz pair for delta resync operation.
Blank Neither journal volumes nor data volumes are registered in this journal group.
– S/N(LDKC): Indicates the serial number and the LDKC number of the
remote storage system.
This column is blank if the attribute of the journal group is neither
Master nor Restore.
– Pair JNLG: Indicates the number of a journal group in the remote
storage system.
This column is blank if the attribute of the journal group is neither
Master nor Restore.
– Controller ID: Indicates the controller ID (model name that indicates
the model) of the remote storage system.
This column is blank if the attribute of the journal group is neither
Master nor Restore.
Note: The controller ID for a USP V storage system is 5.
– Path Watch Time: Indicates the time for monitoring blockade of paths
to the remote storage system. If the status of the mirror where
secondary data volumes in local storage system are registered is Hold
or Hold(Failure), this column will be blank.
– Volume: Indicates the number of data volumes that are registered in
the mirror.
– Capacity: Indicates the total capacity of data volumes that are
registered in the mirror.
• Previous: Displays detailed information about the previous journal group.
• Next: Displays detailed information about the next journal group.
• Close: Closes the JNL Group Detail window.