HP StorageWorks XP Remote Web Console Software - Manual (Page 202)

6-4 Chapter 6 Configuring Journal Groups
Hitachi Universal Replicator for IBM /OS User’s Guide
– To register external volumes, select the PG(Ext.) radio button, enter a
parity group number in the text boxes to the right, and then select
Show. The list displays volumes in the specified parity group. Finally,
select the volumes that you want to register. Note: Parity group
numbers for external volumes start with the letter "E", but you do not
need to enter "E" in the text boxes. For example, if you want to specify
the parity group number "E1-2", you only need to enter 1 and 2 into
the text boxes.
– Select the CU radio button, select a CU number from the drop-down list
to the right. The list displays volumes in the specified CU. Finally,
select the volumes that you want to register.
6. Select Add.
The JNL Volumes list displays the volumes that you want to register. The
Operation column of the list displays Add.
7. Specify the Timer Type option.
Caution : You can specify the Timer Type option only when no journal
volume is registered. If journal volumes are already registered, please go
on to the next step because you cannot specify the Timer Type option.
8. Select Set to close the Edit JNL Volumes window.
9. See the Preview list to check the settings that you have made.
– If you want to add volumes to register, select and right-click a volume
in the Preview list and then select Modify. A window appears and allows
you to add volumes.
– If you want to cancel registering a volume, select and right-click the
volume and then select Cancel.
– If necessary, you can repeat steps 3 to 9 to add volumes to other
journal groups.
10. Select Apply to register journal volumes.
After volumes are registered, the journal groups will be displayed below
Registered in the tree.
Note: If an error occurs, the rightmost column of the Preview list displays
the error code. To view detailed information about the error, right-click the
error code and then select Error Detail. An error message appears and
gives you detailed information about the error.