Insert a printhead – HP Designjet Z3100 Photo Printer series User Manual
Page 135
Advertising
10.
Pull the blue handle upward until the printhead is released from the carriage.
CAUTION:
Do not pull abruptly because this can damage the printhead.
11.
The front-panel display identifies the missing printhead.
Insert a printhead
1.
If the printhead is new, shake the printhead vigorously before removing the protective caps.
2.
Remove the orange protective caps by pulling them down.
ENWW
Insert a printhead 125
Ink an
d prin
th
eads
Advertising