HP Designjet Z3100 Photo Printer series - Manual (Page 43)

4. Select Load roll.
5. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see
The paper type is not in the driver on page 149 .
6. Continue with step six of the easy loading process, skipping steps eight and nine.
TIP: When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid
this, catch your prints as they are cut from the roll and do not stack prints in the basket or turn off
the automatic cutter, see
Turn the automatic cutter on and off on page 42 , and use the Form feed
and cut key to release your print.
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow
the appropriate procedure as described below.
CAUTION: Do not touch the paper while the printer is printing, as it causes image quality
defects.
Unload paper key procedure with paper on the roll
If there is paper on the roll, use the following procedure.
1. Press the Unload paper key on the front panel.
2. When prompted by the front-panel display, lift the blue lever on the left.
3. When prompted by the front-panel display, lightly rewind the paper from the end of the spindle until
removed from the printer.
4. When prompted by the front-panel display, lower the blue lever.
ENWW Unload a roll 33
Paper handling