HP Designjet Z3100 Photo Printer series User Manual
Page 195
the carriage lid after every insertion. The front-panel display indicates the failing one showing the
reseat or replace message.
●
Reseat: you are recommended to remove the printhead and then reinsert it. If that fails, clean the
electrical connections, see
The front-panel display recommends reseating or replacing a printhead
. If that fails, replace the printhead with a new printhead, see
Insert a printhead on page 125
.
●
Replace: the printhead is failing. Replace the printhead with a working printhead, see
Insert a printhead on page 125
.
●
Replacement incomplete: a printhead replacement process has not completed successfully, re-
launch the replacement process and let it finish completely (it is not needed to change the printheads).
●
Remove: the printhead is not a suitable type for use in printing.
ENWW
Printhead status messages 185
In
k system issu
es