HP Designjet Z3100 Photo Printer series User Manual
Page 137
Advertising
6.
Push down as indicated by the arrow shown below.
CAUTION:
When installing the new printhead there may be some resistance, so you need
to press it down firmly but smoothly. You should hear a beep and see confirmation on the
front-panel display that the printhead has been inserted. If you have difficulty, see
insert a printhead on page 178
7.
Insert any other printheads, that need to be installed, with the same procedure, then close the carriage
lid.
8.
Ensure the end of the blue handle catches the wire loop on the near side of the carriage.
ENWW
Insert a printhead 127
Ink an
d prin
th
eads
Advertising