HP Designjet Z3100 Photo Printer series User Manual
Page 138
9.
Lower the handle to rest on the carriage lid.
When all the printheads have been inserted correctly and are accepted by the printer, the printer
beeps.
NOTE:
If the printer does not beep when you insert the printhead and the Replace message
appears on the front-panel display, the printhead may need to be reinserted.
10.
Close the window.
11.
The front-panel display confirms that all printheads are correctly inserted. The printer starts checking
and preparing the printheads. The default routine process, when all printheads are changed, takes
25 minutes. If the printer finds problems in preparing the printheads, it takes longer, up to 65 minutes.
For a single printhead insertion, the times vary between 20 and 40 minutes. After all printheads are
checked and prepared, the printhead realignment procedure runs automatically if paper is loaded,
see
Align the printheads on page 182
.
128 Chapter 9 Handling ink cartridges and printheads
ENWW
Ink an
d prin
th
eads