HP Designjet Z3100 Photo Printer series - Manual (Page 23)

3. Open the DVD icon on your desktop.
4. Open the Mac OS X HP Designjet Installer icon.
5. Follow the instructions on your screen. You are recommended to use the Easy Install option, which
will install the PostScript printer driver. If you would like to install the PCL (raster) driver, select
Custom Installation.
6. The printer software is installed, including the printer driver, HP Printer Utility, and HP Color Center.
7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up
a connection to your printer. Follow the instructions on your screen.
8. When you reach the Select Printer screen, look for your printer's mDNS service name (which you
noted in step 1) in the Printer Name column.
● If you find the right printer name, scroll sideways to see the Connection Type column, and check
that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise, continue searching
further down the list.
● If you cannot find your printer name with a Bonjour/Rendezvous connection type, check
the box My printer is not in the list.
Click Continue.
9. Continue following the instructions on the screen. When you reach the Printer Queue Created screen,
click Quit to exit, or Create New Queue if you want to connect another printer to the network.
10. When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD.
ENWW Connect to a network (Mac OS) 13
In
sta
ll
ing the so
ftwa
re