HP Designjet Z3100 Photo Printer series - Manual (Page 40)

3. Rest the blue end of the spindle on the right side roll holder. If you are loading the gray spindle,
ensure the rounded side of the spindle top is resting on the roll holder.
4. With both hands, push the spindle into both roll holders at the same time. The spindle snaps into
place.
5. If the edge of the roll is torn (sometimes due to tape used to hold end of the roll) or not straight, pull
paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
CAUTION: Cut the paper as straight as possible, as uneven paper does not load correctly.
30 Chapter 4 Paper handling ENWW
Pa
per
ha
nd
li
ng