HP Designjet Z3100 Photo Printer series - Manual (Page 32)

● Default gateway: specify the IP address of a router or computer that is used to connect to other
networks or sub-networks, if none exist, use the IP address of the computer or the IP address of the
print server
● Domain name: specify the name of the DNS domain that the print server resides in, for example,
support.hp.com, note that it does not include the host name; it is not the fully qualified domain name,
such as printer1.support.hp.com
● Idle timeout: specify the number of seconds that an idle connection is allowed to remain open,
270 is the default value, if set to zero, the timeout is disabled and TCP/IP connections remain open
until closed by the other node (such as a workstation) on the network
● Default IP: specify the IP address to use when the print server is unable to obtain an IP address
from the network when powered on or when reconfigured to use BOOTP or DHCP
● Send DHCP requests: specify whether DHCP requests are transmitted when a legacy default IP
address or a default Auto IP is assigned
To configure the same network settings from the front panel, press the Menu key to go to the main menu
and select the Connectivity menu icon , then Gigabit Ethernet > Modify configuration.
Change the graphic language setting
CAUTION: You should not need to change the default graphic language setting (Automatic),
and you are not recommended to do so.
Change the graphic language setting from the HP Easy Printer Care and HP Printer Utility applications
with the following steps.
1. Under Windows, select the Settings tab then Printer settings > Printing preferences.
Under Mac OS, select Configuration then Printer settings > Configure printer settings
> Printing preferences.
2. Select one of the following options.
● Select Automatic to let the printer determine which type of file it is receiving. This setting works
for most software applications.
● Select HP-GL/2 only if you are sending a file of the appropriate type directly to the printer,
without going through a printer driver.
● Select PS only if you are sending a PostScript file directly to the printer, without going through
a printer driver.
● Select PDF only if you are sending a PDF file directly to the printer, without going through a
printer driver.
● Select TIFF only if you are sending a Tagged Image File Format file directly to the printer, without
going through a printer driver.
● Select JPEG only if you are sending Joint Photographic Experts Group file directly to the printer,
without going through a printer driver.
● Select CALS/G4 only if you are sending a file of the appropriate type directly to the printer,
without going through a printer driver.
You can change the graphic language setting from the front panel. Press the Menu key to return to the
main menu the select the Setup menu icon , then Printer preferences > Select graphic
language. Select the desired option and press the OK key to set the value.
22 Chapter 3 Personalizing the printer ENWW
Person
al settings