HP Designjet Z3100 Photo Printer series - Manual (Page 17)

4. Back key - To go to the previous step in a procedure or interaction. To go to the upper level, or leave
the option in the menu, or when given an option.
5. Down key - To go down in a menu or option, or to decrease a value, for example when configuring
the front-panel display contrast or the IP address.
6. Up key - To go up in a menu or option, or to increase a value, for example when configuring the
front-panel display contrast or the IP address.
7. Cancel key - To abort a procedure or interaction.
8. Power key - To turn the printer off or on, it also has a light to indicate the printer's status. If the power
key light is off the device is off. If the power key light is blinking green, the device is starting up. If
the power key light is green on, the device is on. If the power key light is amber on, the device is in
standby. If the power key light is blinking amber, the device needs attention.
9. LED light - Indicates the printer's status. If the LED light is solid green, the device is ready. If it is
flashing green, the device is busy. If it is solid amber, there is a system error. If it is flashing amber,
the printer needs attention.
10. Front-panel display - Displays errors, warnings, and information on using your printer.
To highlight an item in the front-panel display, press the Up or Down key until the item is highlighted.
To select an item in the front-panel display, first highlight it and then press the OK key.
When this guide shows a series of front-panel display items like this: Item1 > Item2 > Item3, it means
that you should select Item1, then select Item2, then select Item3.
Information about specific uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
● The PCL3 raster driver
● The RTL and HP-GL/2 driver for Windows
● The PostScript driver
● The HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS), see Access HP Easy Printer Care
(Windows) or HP Printer Utility (Mac OS) on page 19 , allows you to:
● Manage the printer including color with the HP Color Center
● Manage the job queue, see Job queue management on page 107
● View the status of the ink cartridges, the printheads, and the paper
● View job accounting information, see Retrieving printer usage information on page 113
● Update the printer's firmware, see Update the firmware on page 136
● Access the HP Knowledge Center
● Change various printer settings (in the Settings tab)
● Perform calibrations and troubleshooting
ENWW Printer software 7
In
tr
od
u
ctio
n