HP Designjet Z3100 Photo Printer series - Manual (Page 167)

5. Press the OK key on the front panel, to save the value.
6. Wait until the front panel displays the status screen and re-print your print.
Return to default calibration
Returning to the default calibration sets all the corrections made by the paper advance calibration to zero.
To return to the default paper advance calibration value, you must reset the calibration.
1. Press the Menu key to return to the main menu and select the Image Quality Maintenance menu icon
, then Paper advance calibration > Reset paper advance.
2. Wait until the front panel displays the operation has completed successfully before pressing the
Back key to return to the main menu.
ENWW Recalibrate the paper advance 157
Pa
per
is
sue
s