HP ProCurve 520wl Wireless Access Point - Manual (Page 129)

Specifications
Advanced Wireless Functions
Feature 802.11b 802.11a 802.11b/g
WEP Plus
(Weak Key Avoidance)
1
yes no no
Remote Link Test 1 yes no no
Load Balancing 1 yes no no
AP List 1 yes no no
Medium Density Distribution 1 yes no no
Distance between APs yes no no
Interference Robustness yes no no
SpectraLink VoIP Support yes no no
1 This feature is only available when using an HP ProCurve Wireless 802.11b AP Card 150wl. In addition, this feature
will only give information for ORiNOCO/Agere?Lucent based clients.
Hardware Specifications
Physical Specifications
HP 520wl Unit
Dimensions (H x W x L) = 6.5 x 18.5 x 26 cm (2.5 x 7.25 x 10.25 in.)
Weight = 1.75 Kg (3.5 lb.)
802.11a Antenna Adapter
Dimensions (H x W x L) = 11.3 x 2.10 x 26.2 cm (4.5 x 0.83 x 10.3in.)
Weight = 0.18kg (0.4lb)
Electrical Specifications
Without Active Ethernet Module
Voltage = 100 to 240 VAC (50-60 Hz)
Current = 0.2 amp
Power Consumption = 20 Watts
With Active Ethernet Module
Input Voltage = 42 to 60 VDC
Output Current = 200mA at 48V
Power Consumption = 9-10 Watts
Environmental Specifications
HP 520wl Unit
Operating = 0° to 40°C (32° to 104 °F) @ 20 to 90% relative humidity
Transport = -40° to 60°C (-40° to 140°F) @ 15 to 95% relative humidity (no condensation allowed)
Storage = -10° to 60°C (14° to 140°F) @ 10 to 90% relative humidity (no condensation allowed)
802.11a Antenna Adapter
Operating = 0° to 70°C (32° to 158 °F) @ 20 to 90% relative humidity
Transport = -40° to 75°C (-40° to 167 °F) @ 15 to 95% relative humidity
Storage = -20° to 75°C (-4° to 167 °F) @ 10 to 95% relative humidity
A-3