HP ProCurve 520wl Wireless Access Point - Manual (Page 168)

Command Line Interface (CLI)
802.11b/g Only Parameters
Name Type Values Access CLI Parameter
Wireless Operational Mode Integer dot11b-only
dot11g-only
dot11bg (default)
dot11g-wifi RW mode
Operating Frequency Channel Integer 1 - 14; available
channels vary by
regulatory
domain/country; see
802.11g Channel
Frequencies
RW channel
Supported Data Rates Octet String See Transmit Rate ,
below
R suppdatarates
Transmit Rate Integer32 For 802.11b-only mode:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
For 802.11g-only mode:
0 (auto fallback - default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
For 802.11g-wifi and
802.11bg modes:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec RW txrate
Physical Layer Type Integer ERP (Extended Rate
Protocol) R phytype
Wireless Distribution System (WDS) Parameters
Name Type Values Access CLI Parameter
WDS Table Table N/A R wdstbl
Port Index Integer 3.1 - 3.6 (Wireless) R portindex
Status Integer enable, disable RW status
Partner MAC Address PhysAddress User Defined RW partnermacaddr
C-32