HP ProCurve 520wl Wireless Access Point - Manual (Page 165)

Command Line Interface (CLI)
Link Integrity Parameters
Name Type Values Access CLI Parameter
Link Integrity Group N/A R linkint
Link Integrity Status Integer enable
disable (default) RW linkintstatus
Link Integrity Poll
Interval Integer 500 - 15000 ms
(in increments of 500ms)
500 ms (default) RW linkintpollint
Link Integrity Poll
Retransmissions Integer 0 - 255
5 (default) RW linkintpollretx
Link Integrity IP Target Table
Name Type Values Access CLI Parameter
Link Integrity IP Target
Table Table N/A R linkinttbl
Table Index Integer 1-5 N/A index
Target IP Address IpAddress User Defined RW ipaddr
Comment (optional) DisplayString User Defined (up to 254
characters) RW cmt
Status (optional) Integer enable
disable (default)
delete RW status
C-29