HP ProCurve 520wl Wireless Access Point - Manual (Page 42)

Status Information
3
System Status
System Status is the first screen to appear each time you connect to the HTTP interface. You can also return to this
screen by clicking the Status button.
Figure 3-1 System Status Screen
Each section of the System Status screen provides the following information:
– System Status: This area provides system level information, including the unit’s IP address and contact
information. See
System for information on these settings.
– System Alarms: System traps (if any) appear in this area. Each trap identifies a specific severity level:
Critical, Major, Minor, and Informational. See
Alarms for a list of possible alarms.
3-1