HP ProCurve 520wl Wireless Access Point - Manual (Page 143)

Command Line Interface (CLI)
Figure C-8 Results of “help” CLI command
2. Complete command description and command usage can be provided by:
[Device-Name]>help <command name>
[Device-Name]><command name> help
history
Shows content of Command History Buffer. The Command History Buffer stores command statements entered in the
current session. To avoid re-entering long command statements, use the keyboard “up arrow” (Ctrl-P) and “down
arrow” (Ctrl-N) keys to recall previous statements from the Command History Buffer. When the desired statement
reappears, press the Enter key to execute, or you may edit the statement before executing it.
[Device-Name]> history
passwd
Changes the CLI Password.
[Device-Name]> passwd oldpassword newpassword newpassword
reboot
Reboots Access Point after specified number of seconds. Specify a value of 0 (zero) for immediate reboot.
[Device-Name]> reboot 0
[Device-Name]> reboot 30
search
Lists the parameters supported by the specified table. This list corresponds to the table information displayed in the
HTTP interface. In this example, the CLI returns the list of parameters that make up an entry in the IP Access Table.
[Device-Name]> search mgmtipaccesstbl
Figure C-9 Results of “search mgmtipaccesstbl” CLI command
C-7