HP XP RAID Manager Software - Manual (Page 39)

2. In the User Groups tab, select a user group to which to add a user. This is dependent on which
permissions you want to give to the user.
3. In the Permission tab, confirm that the displayed permissions are appropriate for the user.
4. Click the User tab and then Create User to open the Create User dialog box.
5. Enter a user ID (user name).
6. Select Activate or Lock for the account. If you select Lock, the user of this account is disabled
and cannot log in to Remote Web Console.
7. To use an authentication server, select External. To authenticate users with only Remote Web
Console, select Local.
8. If you select Local, enter the password of this user account in two places.
For a password, all alphanumeric characters and symbols can be used. The length must be
between 6 to 256.
9. Click Finish.
10. Specify a task name and click Apply.
Changing a user’s password
This section explains how to change (reissue) the password of other users.
Prerequisites
•
You must have the Security Administrator (View & Modify) role to perform this task.
•
The target user must not use the authentication server. If the user uses the authentication server,
perform the applicable procedure for the authentication server.
Procedure 16 To change a user's password:
1. In the tree, click Administration
→User Groups.
2. In the User Groups tab, select a user group to which the user belongs.
3. Click the User tab, select the user, and then click Change Password. The Change Password
dialog box opens.
4. Specify a new password of the user in two places.
5. Click Finish.
6. Specify a task name and click Apply.
Changing a user’s permissions
A user’s permissions are determined by their user group. You change the permissions by changing
the user group to which the user is assigned. A user can belong to multiple user groups.
For example, one user has the security view permission and you want to change this to the storage
modify permission. In this case, add this user to the storage modify build-in group and then remove
the user from the security view build-in group. If you change permissions of a logging in user, the
change takes effect from the next time the user logs in.
Prerequisites
•
You must have the Security Administrator (View & Modify) role to perform this task.
•
A user must belong to at least one user group.
Procedure 17 To change the permission of a user:
1. In the tree, click Administration
→User Groups.
2. In the User Groups tab, select a user group to add the user and then click Add Users.
3. In the Add User dialog box, select a user and click Add.
4. Click Finish.
5. Specify a task name and click Apply.
Managing user accounts 39