HP XP RAID Manager Software - Manual (Page 62)

2. Click to change to Modify mode.
3. Select a desired program product in the list.
4. In License Status, select Enable or Disable.
5. Click Set. The Status column changes to Install or Install(Disabled).
6. Click Apply. The status changes.
Uninstalling program products
Procedure 39 To uninstall program products on the Remote Web Console:
1. Click Settings > Environmental Setting > License Key. The License Key window opens.
2. Click to change to Modify mode.
3. Select the desired option that you want to uninstall in the list.
4. From Mode, click Key Code.
5. Click Uninstall. The status changes to Remove.
6. Click Apply. The status changes from Installed to Not Installed.
7. On rare occasions, a program product option that is listed as Not Installed but still has available
licensed capacity (shown as XX TB) might remain in the list. In this case, select that option and
select Uninstall to reset the information.
Insufficient license capacity
If the license capacity becomes insufficient, a message appears when you log in to Remote Web
Console.
If you add LDEVs and the available amount of volume capacity exceeds the licensed capacity,
Grace Period appears under the Status column in the License Key window. In this case, you need
to purchase an additional license within 30 days to cover the capacity shortage.
If you use Thin Provisioning, the licensed capacity might become insufficient because the used
capacity of Thin Provisioning pools could increase even though you did not add any volumes. You
need to purchase an additional license within 30 days to cover the capacity shortage. For details
on how to calculate pool capacity, see the HP P9000 Provisioning for Open Systems User Guide.
In the meter license, for reducing the amount exceeding the permanent license capacity among
the used capacity ((permanent license capacity) + (meter licensed capacity) < (used capacity)), if
the meter licensed capacity becomes insufficient, Grace Period is displayed in the status column
on the License Key screen. In this case, you need to purchase an additional license within 30 days
to cover the capacity shortage.
The meter will continue to be reduced during the grace period. To stop the reduction, you will have
to reduce the used capacity to the permitted license capacity. All negative TB-days license must
be covered by an additional meter based license.
Exceeded capacity after LDEV, a pair, or pool volume is deleted
When the licensed capacity exceeds the mounted capacity after you reduce the number of LDEVs,
pairs or pools, Grace Period or Not Enough License might remain under the Status column in the
License Key window. In this case, use the Available button to refresh the status.
Procedure 40 To refresh the license status:
1. Click Settings > Environmental Setting > License Key. The License Key window opens.
2. Click to change to Modify mode.
3. In Mode, click Available.
4. Click Install. The Status column changes to Install.
5. Click Apply. The status changes to Installed.
62 License keys