HP XP RAID Manager Software - Manual (Page 45)

HP-SIM-installation-directory\bin>mxtool –r -f definition-file-path-of-the-tool
An example follows:
C:\Program Files\HP\Systems Insight Manager\bin>mxtool –r -f C:\tmp\RWCTool.xml
Using SMI-S function with Remote Web Console user account
P9500 storage systems support the SMI-S function developed by SNIA. Storage administrators can
use the SMI-S function by using SMI-S compliant management software.
Prerequisite
SMI-S Provider program product is installed.
Procedure 27 To use the SMI-S function:
1. Create a Remote Web Console user account in the management software.
The user must belong to either of the following built-in user groups.
•
Storage Administrator (View & Modify) User Group
The user has full permissions to access the SMI-S function from the management software.
•
Storage Administrator (View Only) User Group
The user has read only permissions to access the SMI-S function from the management
software.
2. In the management software, specify the storage system that the management software should
access.
•
IP address: Specify the IP address of the storage system.
•
Protocol: Specify HTTPS.
•
Port: Specify 5989.
•
Namespace: Specify root/hitachi/smis or interop.
For details on SMI-S, see http://www.snia.org/.
Account lock policy
The user account is automatically locked after three unsuccessful logins to Remote Web Console
or RAID Manager. The account is locked for 60 seconds.
Session timeout
A session timeout occurs if the system receives no user operation for one minute due to a network
error.
Using SMI-S function with Remote Web Console user account 45