HP XP RAID Manager Software - Manual (Page 53)

Sending a test syslog
After configuring syslog notification, you should send a test syslog to verify your settings.
Prerequisites
•
You must have Storage Administrator (Initial Configuration) role to perform this task.
•
Complete the configuration of the syslog server
Procedure 35 To send a test syslog:
1. Click Settings > Environmental Setting > Edit Syslog Server Settings.
2. Make sure that the severs are set to Enable and that the settings in the window are correct.
3. Check Send a test message.
4. Enter a name in Location Identification Name field to identify the storage system.
5. Click Finish.
6. Specify a task name and click Apply.
7. Confirm that the syslog servers received the following log:
"RefCode:7FFFFF, This is Test Report."
Setting syslog notification for SIMs 53