HP XP RAID Manager Software - Manual (Page 48)

4. Select IPv4, IPv6, or Host Name, and enter the IP address or host name of the mail server.
5. In SMTP-AUTH, select Enable to use SMTP authentication or Disable not to use SMTP
authentication. Enter the account and password for SMTP authentication if you select Enable.
6. Enter From Address (required) and Return Address (optional).
7. In To Address, add an e-mail address:
1.
Select a blank row in the list.
2. Enter an e-mail address in the text box.
3. Select To, Cc, or Bcc for the attribute.
4. Click Update.
8. Repeat step 7 for all e-mail addresses.
To delete an e-mail address, select the target address in the list and click Delete. You can
choose multiple addresses and delete them at once.
To change an e-mail address, select the target address in the list and perform the same
operation for adding an address.
9. Click Apply to apply the settings to the storage system.
Sending a test e-mail
After configuring e-mail notification, you should send a test e-mail to confirm your settings.
Prerequisites
•
You must have the Storage Administrator (Initial Configuration) role to perform this task.
•
Configuration of the mail server must be completed.
Procedure 30 To send a test e-mail:
1. Click Settings > Environmental Setting > E-mail Information. The E-mail Information window
opens.
2. Click to change to Modify mode.
3. Make sure that Mail Notice is set to Enable and that the settings in the window are correct.
4. Click Test Send. A confirmation message appears.
5. Click OK.
6. Confirm that mail clients received the e-mail with the reference code 7FFFFF.
An example of a test e-mail follows:
Date: FRI 03 OCT 2009 10:10:10 +9000 (JST)
To: [email protected]
From: [email protected]
Reply-To: [email protected]
Subject: P9500 Report
Date : 03/10/2009
Time : 10:09:30
Machine : HP-P9500(Serial# 64019)
RefCode : 7FFFFF
Detail: This is Test Report.
The fields in the test e-mail follow.
Table 13 Details of e-mail for system failures notice
Description Item #
Date and time when an e-mail was sent. This timestamp comes from the mail server. Date 1
E-mail address of the receiver. To 2
48 Configuring the Remote Web Console environment