HP XP RAID Manager Software - Manual (Page 75)

Procedure 44 To modify a task:
1. In the tree, click Storage Systems
→Tasks. The list of tasks appears.
2. In the list, click the task or tasks that you want to modify.
3. On the bottom right corner of the window, click the corresponding button for the task you
want to perform.
•
Click Delete Tasks to delete or cancel a task.
•
Click Suspend Tasks to suspend a queued task.
•
Click Resume Tasks to resume a suspended task.
•
Click More Actions
→Enable Auto Delete to have tasks automatically deleted from the task
list when they are completed.
•
Click More Actions
→Disable Auto Delete to keep tasks in the task list even when they are
completed.
4. Verify the displayed settings and click Apply.
Stalled tasks
If a queued task is not performed over a reasonable period, check the following:
•
Did the task fail? Click failed to view the reason. then delete the task, correct the problem and
try the task again.
•
Are too many tasks in the task list because Auto Delete is disabled? Click Enable Auto Delete
to remove tasks from the window.
•
Is another program changing the storage system configuration? Check this by observing
whether Resource Lock is displayed for too long a time. If so, verify that another program is
running and then wait until its changes are completed.
•
The percentage of progress of an ongoing task may not change if some sort of operation is
in progress.
Setting the status refresh interval of the Tasks window
The Tasks window automatically updates every 60 seconds by default. This interval can be changed
using the following procedure.
Procedure 45 To change the refresh interval:
1. Click Settings
→Environmental Setting→Edit Information Display Settings.
2. Specify the interval for Task Screen Refresh Interval. If No Update is specified, the Tasks
window will not be automatically updated. In this case, to refresh the window, you must use
Refresh View or Refresh All.
3. Click Apply.
Managing tasks 75