HP XP RAID Manager Software - Manual (Page 61)

Installing and uninstalling program products
To activate the program products on Remote Web Console, the program products must be installed
using license keys.
Installing program products using a license key code
Any Storage Administrator with modify permission can install license keys.
Procedure 36 To install a program product by using the license key code:
1. Click Settings > Environmental Setting > License Key. The License Key window opens.
2. Click to change to Modify mode.
3. Select Key Code in Mode.
4. In Key Code, enter the license key code. You cannot copy and paste text from other
applications.
5. Click Install. The Status column changes to Install.
6. Click Apply. The status changes to Installed.
If installation fails, an error message window appears. To display the error details in the dialog
box, select the failed option and then click Detail.
Installing program products using a license key file
You can install multiple program products in a single procedure using a license key file. The license
key files are provided by HP.
The required time for installing a license key file depends on the number of license keys included
in the file. A file with 30 license keys can take about three minutes to install. A file with 1000
license keys can take about 60 minutes to install.
Prerequisite
•
The license key file name can be up to 200 alphanumeric characters but cannot include the
following symbols: ", \, ;, :, ,, *, ?, <, >, |, /,.
Procedure 37 To install program products using the license key file:
1. Click Settings > Environmental Setting > License Key. The License Key window opens.
2. Click to change to Modify mode.
3. From Mode, click File. The Browse button becomes available.
4. Click Browse to display the dialog box, and then select the license key file (file extension is
plk
) to be used for installing options on the displayed window. The selected file name appears
in the File Name text box.
5. Click Install.
6. Click Apply. The status changes to Installed.
7. If installation fails or an error occurs during the installation, a message appears listing the
failed options. To display the error details in the dialog box, select the failed option and then
click Detail.
Enabling or disabling a license
The term key can be enabled or disabled. You can also enable the license when you install more
than one program product at once, however, some program products are not available because
the requirements for these program products are not satisfied. In such a case, satisfy the requirements
first, then enable the license.
Procedure 38 To enable or disable the license:
1. Click Settings > Environmental Setting > License Key. The License Key window opens.
Installing and uninstalling program products 61