HP XP RAID Manager Software - Manual (Page 52)

Table 16 Restoring configuration files (continued)
Required role Description Configuration file
Storage Administrator (Initial
Configuration) Connection to the authentication application. External application
Storage Administrator (Initial
Configuration) Connection to Command View AE Device Manager. Command View
Advanced Edition
Setting
Procedure 33 To restore the configuration files:
1. Start a web browser and enter the following URL to open the tool panel:
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
2. Click Control Panel to open the Control Panel.
3. Enter the user ID and password and click Login.
4. Click the Restore tab to open the Restore dialog box.
5. Click the files and click Browse to specify the directory of the file. You can only restore the
file that you have permission to.
6. Click Next.
7. Click the configuration files to restore.
8. Click Submit.
9. If the Password check dialog box opens, enter User ID, Password, and Re-enter Password of
the storage administrator on the backup user list, and click Submit on the Password check
dialog box.
The Restore File dialog box opens.
10. Confirm the restoring process has been completed successfully.
11. Click Close to close the dialog box.
Setting syslog notification for SIMs
You can be notified in syslog format when storage system failures occur. Failures notified in syslog
format are the same as failures reported by SIMs displayed in the Alerts window or failures reported
by SNMP traps.
Configuring syslog notification
You can configure settings so that system storage failures will be notified in syslog format.
Prerequisites
•
You must have Storage Administrator (Initial Configuration) role to perform this task.
•
You must have a server that supports syslogs.
•
If a firewall is used, a port must be opened to transfer syslogs.
Procedure 34 To configure settings for syslog notification:
1. Click Settings > Environmental Setting > Edit Syslog Server Settings.
2. Select Enable, and specify IP Address and Port Number to transfer syslogs to a primary server.
3. Select Enable, and specify IP Address and Port Number to transfer syslogs to a secondary
server.
4. Specify any name in Location Identification Name to identify the storage system.
5. Click Finish.
6. Specify a task name and click Apply.
52 Configuring the Remote Web Console environment