HP XP P9500 Storage - Manual (Page 147)

Description Field
The T-VOL’s cache logical partition CLPR (T)
If you click Apply and then the operations in the Preview list fail, an error code indicates
the cause of the error. Error Code
Data in the status bar below the Preview list indicate the number of changes, the type of change
(the operation), and any command options.
Pair Operation command menu
Right-click a volume or pair to open the pair operation command menu. The following table
describes the commands that display in the menu.
Description Command
Opens the Detail dialog box, which shows detailed information for the selected volume or
pair. Detail
Opens the Add Pair dialog box, in which you create new pairs. Add Pair
Opens the Split Pair dialog box, in which you split pairs. Split Pair
Opens the Resync Pair dialog box, in which you resynchronize pairs. Resync Pair
Opens the Suspend Pair dialog box, in which you suspend pairs. Suspend Pair
Opens the Delete Pair dialog box, in which you delete pairs. Delete Pair
Opens the Set/Reset Reserve Attribute dialog box, in which you set/reset the S-VOL reserve
attribute. Change Reserve
Opens the Information dialog box, which shows number of pairs or reserved volumes. Information
Display Filter dialog box
Use this dialog box to filter the volumes on the Pair Operations window. To open this dialog box,
click Display Filter in the Pair Operation window.
Pair Operation window 147