5 performing pair operations, Pair operations workflow, Check pair status – HP XP P9500 Storage User Manual

Page 37: Pair creation, Prerequisite information for creating pairs, Related information

Advertising
background image

5 Performing pair operations

This chapter provides instructions for performing BC Z pair operations using RWC. Also included
is an operation for splitting pairs by consistency group, using RAID Manager.

Pair operations workflow

A typical workflow for performing pair operations consists of the following. You must have Storage
Administrator (Local Copy) role to perform BC Z operations.

•

“Check pair status” (page 37)

. Each operation requires a pair to have a specific status. You

also check pair status to ensure that an operation completed successfully.

•

“Pair creation” (page 37)

, in which the S-VOL becomes a duplicate of the P-VOL. You can

create a pair and immediately split it so that you can access the S-VOL.

•

“Suspending pair creation” (page 41)

.

•

“Pair split” (page 42)

, which separates the P-VOL and S-VOLs and allows use of S-VOL data

by secondary applications.

•

“Splitting pairs in a consistency group using At-Time Split workflow” (page 44)

, which allows

you to split pairs in a consistency group at a specified time.

•

“Pair resynchronization” (page 45)

, in which the S-VOL is again updated from the P-VOL.

•

“Pair deletion” (page 47)

in which the pair relationship between the pair volumes is ended,

though the data remains.

Check pair status

Every pair operation requires the pair to have a specific status. When you want to perform a pair
operation, check pair status to ensure that you can proceed successfully.

•

For pair status definitions and instructions for finding pair status, see

“Monitoring the system

” (page 49)

.

•

For the operations allowed for specific pair statuses, see

“Status, pair operations permitted ”

(page 51)

.

Pair creation

When you create the initial copy, data in the P-VOL is copied to the S-VOL. During the operation,
the P-VOL can receive updates from the host. After the initial copy is completed, the updated data
in the P-VOL—differential data—is copied to the S-VOL periodically (update copy).

You can create the pair and immediately split it so that you can have instant access to the S-VOL.
Instructions are included in the procedure.

Related information

•

“Prerequisite information for creating pairs” (page 37)

•

“Creating pairs” (page 39)

Prerequisite information for creating pairs

•

Make sure that your volumes are set up for pairing. For more information, see

“Planning pair

volumes” (page 15)

.

•

Volumes should be in SIMPLEX status.

Pair operations workflow

37

Advertising