Output descriptions, Query example – HP XP P9500 Storage User Manual
Page 81
QUERY example
Output descriptions
The following table shows the field descriptions of the output resulting when CQUERY TSO and
QUERY ICKDSF
commands are run.
Table 21 Field descriptions for CQUERY TSO and the QUERY ICKDSF command output
Description
Field
Device number of the volume on which the CQUERY command is issued.
DEVICE
PRIMARY indicates that the volume is a P-VOL. SECONDARY indicates that the volume
is a T-VOL.
LEVEL
Pair status
STATE
Invalid for BC; Active is shown.
PATH STATUS
Invalid for BC; NO is shown.
CRIT
Invalid for BC; NO is shown.
CGRPLB
SSID of the P-VOL CU
PRIMARY-SSID
P-VOL LDEV number
PRIMARY-CCA
P-VOL CU number
PRIMARY-LSS
P-VOL serial number
PRIMARY-SERIAL
SSID of the S-VOL CU
SECONDARY-SSID
S-VOL LDEV number
SECONDARY-CCA
S-VOL CU number
SECONDARY-LSS
S-VOL serial number. Running the CQUERY TSO command for the S-VOL also show
following information:
SECONDARY-SERIAL
00ab000nnnnn
where a indicates that the pair is defined as a consistency group and b indicates the
pair was split using At-Time Split. 0 indicates otherwise. nnnnn is the S-VOL serial number.
Showing pair information with CQUERY TSO, QUERY ICKDSF
81