HP LaserJet M1522 Multifunction Printer series - Manual (Page 105)

7. To connect a telephone, plug a telephone cord into the previous device’s “telephone” port. Plug
the other end of the telephone cord into the telephone “line” port.
8. After you have finished connecting additional devices, plug all of the devices into their power
sources.
Set up fax with a telephone answering machine
● Set the product rings-to-answer setting for at least one ring more than the number of rings for which
the answering machine is set.
● If an answering machine is connected to the same telephone line but on a different jack (in another
room, for example), it might interfere with the product's ability to receive faxes.
Setup for stand-alone fax
1. Unpack and set up the product.
2. Set the time, date, and fax header. See Configure fax settings on page 93 .
3. Set other settings as necessary to configure for the product environment.
Configure fax settings
The product fax settings can be set from the control panel, from HP ToolboxFX, or from the embedded
Web server. At the initial set-up process, the HP Fax Setup Wizard can be used to configure the settings.
In the United States and many other countries/regions, setting the time, date, and other fax header
information is a legal requirement.
Use the control panel to set the fax time, date, and header
To use the control panel to set the date, time, and header, complete the following steps:
1. At the control panel, press Setup ( ).
2. Use the arrow buttons to select System setup, and then press OK .
3. Use the arrow buttons to select Time/Date. Press OK .
4. Use the arrow buttons to select the 12-hour clock or 24-hour clock, and then press OK .
5. Use the alphanumeric buttons to enter the current time.
ENWW Setup 93