Print on both sides of the paper (duplex printing) – HP LaserJet M1522 Multifunction Printer series User Manual
Page 73
Print on both sides of the paper (duplex printing)
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper with the front side down, bottom-edge first.
●
For all other trays, load letterhead paper with front side up, and the top edge at the back of
the tray.
CAUTION:
To avoid jams, do not load paper that is heavier than 105 g/m
2
(28 lb bond).
2.
On the File menu in the software program, click Print.
3.
Select the driver, and then click Properties or Preferences.
4.
On the Finishing tab, select Print on both sides (manually).
5.
Click OK.
6.
Send the print job to the product. Follow the instructions in the pop-up window that appears before
feeding the output stack into tray 1 for printing the second half.
7.
Go to the product. Remove any blank paper that is in tray 1. Insert the printed stack with the printed
side up, and the bottom-edge feeding into the product first. You must print the second side from
tray 1.
8.
At the control panel, press
OK
to continue.
ENWW
Print on both sides of the paper (duplex printing)
61