Copy settings, Copy quality, Clean the scanner glass – HP LaserJet M1522 Multifunction Printer series User Manual
Page 82
3.
Use the arrow buttons to select Def. Collation, and then press
OK
.
4.
Use the arrow buttons to select On or Off.
5.
Press
OK
to save the selection.
NOTE:
The factory-set default for automatic copy collation is On.
Copy settings
Copy quality
Four copy-quality settings are available: Text, Mixed, Film photo, and Picture.
The factory-set default for copy quality is Mixed. This setting is the best for items that contain a
combination of text and graphics.
When making a copy of a photo or graphic, you can select the Film photo setting for photos or the
Picture setting for other graphics to increase the quality of your copy. Select the Text setting for
documents that contain mostly text.
Adjust the copy quality for the current job
1.
On the product control panel, press
Quality
to see the current quality setting for the copy.
2.
Use the arrow buttons to scroll through the quality setting options.
3.
Select a setting, and then press
Start Copy
to save the selection and immediately start the copy
job, or press
OK
to save the selection without starting the job.
NOTE:
The change in the setting remains active for about 2 minutes after the copy job has been
completed. During this time, Custom settings appears on the product control-panel display.
Adjust the default copy quality
1.
On the product control panel, press
Setup
( ).
2.
Use the arrow buttons to select Copy setup, and then press
OK
.
3.
Use the arrow buttons to select Default Quality, and then press
OK
.
4.
Use the arrow buttons to select the copy quality, and then press
OK
to save the selection.
Clean the scanner glass
Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the
accuracy of special features such as fit-to-page and copy.
NOTE:
If streaks or other defects appear only on copies produced using the automatic document
feeder (ADF), clean the scanner strip (step 3). It is not necessary to clean the scanner glass.
1.
Turn off the product, unplug the power cord from the electrical socket, and raise the lid.
70
Chapter 8 Copy
ENWW