HP LaserJet M1522 Multifunction Printer series - Manual (Page 138)

Solve fax problems
Fax error messages
Alert and warning messages appear temporarily and might require the user to acknowledge the
message by pressing
OK to resume or by pressing Cancel to cancel the job. With certain warnings, the
job might not complete or the print quality might be affected. If the alert or warning message is related
to printing and the auto-continue feature is on, the product will attempt to resume the printing job after
the warning has appeared for 10 seconds without acknowledgement.
Alert and warning message tables
Table 10-1 Alert and warning messages
Control panel message Description Recommended action
Comm. error A fax communication error occurred between
the product and the sender or receiver. Allow the product to retry sending the fax.
Unplug the product telephone cord from the
wall, plug in a telephone, and try making a
call. Plug the product phone cord into a jack
for another phone line.
Try a different phone cord.
If the error persists, contact HP. See
www.hp.com/support/ljm1522 or the support
flyer that came in the product box.
Fax delayed – Send memory full Fax memory is full. Cancel the fax by pressing OK or Cancel .
Resend the fax. You might need to send the
fax in multiple sections if the error occurs
again.
Fax is busy Canceled send The fax line to which you were sending a fax
was busy. The product has canceled sending
the fax. Call the recipient to ensure that the fax
machine is on and ready.
Check that you are dialing the correct fax
number.
Check that the Redial if busy option is
enabled.
Check for a dial tone on the phone line by
pressing
Start Fax .
Make sure that the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making a
voice call.
Plug the product phone cord into a jack for
another phone line, and then try sending the
fax again.
Try a different phone cord.
If the error persists, contact HP. See
www.hp.com/support/ljm1522 or the support
flyer that came in the product box.
Fax is busy Redial pending The fax line to which you were sending a fax
was busy. The product automatically redials
the busy number. See
Set autoredial
on page 102 .
Allow the product to retry sending the fax.
Call the recipient to ensure that the fax
machine is on and ready.
126 Chapter 10 Fax ENWW